Rough-country 1031 Instrukcja Użytkownika Pobierz pdf

97-06 JEEP TJ 7” FLARE KIT

Thank you for choosing Rough Country for all your suspension needs.

Please read instructions before beginning installation. Check the kit hardware against the parts list on this page.

Be sure you have all needed parts and know where they go. Also please review tools needed list and make

sure you have needed tools.

Kit Contents:

Rear Driver Flare

Rear Pass Flare

Front Driver Flare

Front Driver Lower Flare

Front Pass Flare

Front Pass Lower Flare

1-Hardware Bag

92103100

Tools Needed:

Pliers

8MM Socket / Wrench

10mm Socket / Wrench

11MM Socket / Wrench

REAR INSTALLATION INSTRUCTIONS

1. Starting on the rear, remove the plastic trim retainer as shown holding the inner fender skirting in place on

the front of the rear fender well.

2. Remove the plastic debris flap hardware as shown using a 8mm & 11mm socket and remove the flap. Re-

tain hardware.

PHOTO 1 PHOTO 2

11mm

8mm

REMOVE THE PLASTIC RETAINER

1 2 3 4

97-06 JEEP TJ 7” FLARE KIT Thank you for choosing Rough Country for all your suspension needs. Please read instructions before beginning installation

3. Remove the inner fender wheel well plastic allowing access to the plastic flare retainers. See Photo 3. 4. Remove the all hardware securing the s

FRONT INSTALLATION INSTRUCTIONS 1. Remove the front lower leg of the fender flare using a 8mm wrench. See Photo 1. 2. Remove the bulb and harness f

PHOTO 7 8. Reinstall the bulb / harness in the flare. See Photo 7. REINSTALL THE WIRING HARNESS

Brak uwag

Rough-country 1031 Instrukcja Użytkownika