Rough-country 7572 Instrukcja Użytkownika Pobierz pdf

97-06 JEEP TJ ADJUSTABLE TRACK ROD KIT

Thank you for choosing Rough Country for all your suspension needs.

Rough Country recommends this system be installed by a certified technician. In addition to these instructions, profes-

sional knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to

install this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehi-

cle.

PRODUCT USE INFORMATION

We strongly recommend, because of rollover possibility that seat belts and shoulder harnesses should be worn at all

times. Avoid situations where a side rollover may occur. Do not add, alter, or fabricate any factory or after-market parts

to increase vehicle height over the intended height of the Rough Country product purchased. Mixing component brands

is not recommended. Rough Country makes no claims regarding lifting devices and excludes any and all implied claims.

We will not be responsible for any product that is altered.

If question exist we will be happy to answer any questions concerning the design, function, and correct use of our prod-

ucts.

92757200

INSTALLATION INSTRUCTIONS

1. Place vehicle on a level surface and face tires in a straight forward position.

2. Place vehicle in park and set e-brake. Chock wheels to prevent movement. Vehicle will remain on ground with

suspension at ride height for installation.

3. Remove the factory bolt and nut on the passengers side axle mount and remove the nut and cotter pin from the

frame mount end.

4. Remove the factory track rod.

5. Add anti-seize to the tie rod end sleeve and adjust the new adjustable track rod to the starting position

measurement, as shown on the next page, by turning the threaded tie rod end in or out to fit in the stock mounting

location.

Photo 1 Photo 2

INSTALL ON AXLE WITH STOCK HARWDARE

INSTALL ON FRAME WITH STOCK HARWDARE

1 2

Strona 1

97-06 JEEP TJ ADJUSTABLE TRACK ROD KIT Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends this system be in

7. Using a plumb bob or similar tool, place against coil hat, adjusting to where string does not interfere with coil. 8. Take a measurement from the

Brak uwag

Rough-country 7572 Instrukcja Użytkownika